IC308/rev. 9-14 © 2014 USG Corporation and/or its af liates. All rights reserved. Printed in U.S.A. IC700/rev. 10-23 © 2023 USG Corporation and/or its af liates. All rights reserved. Printed in USA Manufactured by USG Interiors, LLC 550 West Adams Street Chicago, IL 60661 HIGH RECYCLED CONTENT Notice The information in this document is subject to change without notice. CGC Inc. or USG Corp. assumes no responsibility for any errors that may inadvertently appear in this document. ORDER SAMPLES/LITERATURE USG: usg.com or
[email protected] CGC: contact Sales Representative TECHNICAL SERVICES 800 USG.4YOU (874-4968) FOR MOST UP-TO-DATE TECHNICAL INFORMATION AND LEED REPORT TOOL usgdesignstudio.com cgcdesignstudio.com Fire Rating LR Recycled Content Array-NRC1 PRODUCT INFORMATION Materials Baf e Sizes - Height x Width x Length Aluminum baf es; painted, anodized and powder coated 4" x 1.5" x 24" - 144" 6" x 1.5" x 24" - 144" 4" x 2.0" x 24" - 144" 6" x 2.0" x 24" - 144" 4" x 3.0" x 24" - 144" 6" x 3.0" x 24" - 144" 4" x 4.0" x 24" - 144" 6" x 4.0" x 24" - 144" Class A ASTM E84 0.93 for Blanco Mat 4182 Up to 65% Recycled Content Up to 0.95 (requires perforations and acoustic infi ll) Standard lengths in 24" increments DETAILS DX® Grid Attachment DX® Grid Attachment Curvatura™ Grid Attachment Independently Suspended DX tee DX tee Paraline Bafes typ spacing varies per design clip 4" or 6" high metal bafe metal bafe grid attachment clip main tee or cross tee 4" or 6" high metal bafe Curvatura attachment clip Curvatura main tee 4" or 6" high metal bafe free attachment clip cable with cable connector hanger wire DX® Grid with Grouping Bar Grouping Bar Attachment Wall Mount (4" or 6" On Center baf e battens) Cross Tee Main Tee Grouping Bar Optional Fixing Bracket Fixing Bracket required with bafes wider than 1-1/2" (required for seismic applications) 2" long Wall Mount Batten Z-Clip PERSPECTIVE wall angle cross tee 4" high Metal Bafe 6" high Metal Bafe metal bafe grid attachment clip main tee Curvatura main tee hanger wire cross tee 4" high Metal Bafe 6" high Metal Bafe Curvatura Attachment Clip PHYSICAL DATA Product literature System Guide: IC701 Data sheet: IC700 Installation Guide: IC702 Field Cutting Instructions: IC718 Online tools usgdesignstudio.com or cgcdesignstudio.com The Timbre fi nish used on Paraline Baf es incorporates a coating manufactured by a third party manufacturer which provides a 30-year limited warranty under the circumstances set forth in the warranty. This limited warranty is issued to USG Ceilings Plus, LLC and USG Interiors, LLC ("USG"). In the event our customer experiences a problem with the coating covered by the third party manufacturer's limited warranty, USG will use the information you provide to fi le a claim under the limited warranty. ASTM E84 and CAN/ULC S102 surface-burning characteristics (with Acoustibond™ backer) Class A Flame spread: 25 or less Smoke developed: 50 or less Installation Install according to ASTM C636, ASTM E580, CISCA and USG requirements. Alternate installation methods may be used when approved by the authority having jurisdiction. USG recommends checking with the authority having jurisdiction prior to designing and installing a suspended ceiling system. Seismic Paraline Baf es with Grouping Bar has been engineered, full scale dynamic tested, and approved per AC156, AC368, and ASTM E3118, test criteria when installed per USG installation instructions. System Approved for seismic categories A through F. Limitation Some commercially acceptable color variation may occur between lots and between dif erent size products of the same color. For more information about metal ceiling fi nishes, refer to Metal Ceilings Technical Guidelines published by the Ceilings & Interior Systems Construction Association (CISCA). Note 1. Array-NRC is calculated per ASTM C423 and varies with baf e profi le size, spacing of baf es, perforation pattern, and acoustic backer/infi ll material. Perforated baf es spaced closely together with acoustic infi ll provide higher Array-NRC. 2. For perforated then post painted Paraline® Baf es use fi berglass in polybag for sound absorption 3. All perforations, including CD06305NB (A062), are on vertical sides of baf es only. USG PARALINE® BAFFLES The trademarks USG, CGC, ACOUSTIBOND, BLANCO MAT, CURVATURA, DONN, DX, GRIDWARE, PARALINE, TIMBRE, IT’S YOUR WORLD. BUILD IT., the USG/CGC logo, the design elements and colors, and related marks are trademarks of USG Corporation or its af liates. Safety First! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read SDS and literature before specifi cation and installation. Z-Clip 2” long Wall Batten Batten End Cap Batten End Cap Z-Clip Grouping Bar Cross Tee Main Tee Warranty: SC2102 Perforation Selection Guide: IC425 Cleaning Instructions: IC518 Low Emissions (VOC) CDPH 01350 v1.2-2017 compliance on select fi nishes, see usg.com for more details and documentation. Specialty Ceiling Systems 49
ceilings systems catalog sc2000
| Title Name |
Pages |
Delete |
Url |
| Empty |
Search Text Block
Page #page_num
#doc_title
Hi $receivername|$receiveremail,
$sendername|$senderemail wrote these comments for you:
$message
$sendername|$senderemail would like for you to view the following digital edition.
Please click on the page below to be directed to the digital edition:
$thumbnail$pagenum
$link$pagenum
