IC406/rev. 8-24 © 2024 USG Corporation and/or its affiliates. All rights reserved. Printed in U.S.A. Manufactured by USG Interiors, LLC 550 West Adams Street Chicago, IL 60661 Notice The information in this document is subject to change without notice. CGC Inc. or USG Corp. assumes no responsibility for any errors that may inadvertently appear in this document. ORDER SAMPLES/LITERATURE USG: usg.com or
[email protected] CGC: contact Sales Representative TECHNICAL SERVICES 800 USG.4YOU (874-4968) FOR MOST UP-TO-DATE TECHNICAL INFORMATION AND LEED REPORT TOOL usgdesignstudio.com cgcdesignstudio.com usg.ecomedes.com PRODUCT INFORMATION Product Typical Sizes System Weight Nominal Actual Clear Matte .060" Polycarbonate 2'x2' 23-3/4"x23-3/4" Approximately .374 lb./sq. ft. Standard Décors – 0.118" PETG (excluding Take II) 2'x2' 2'x6' 23-3/4"x23-3/4" 23-3/4"x71-3/4" Approximately 0.9 lb./sq. ft. Rain2 0.118" Acrylic 2'x2' 2'x6' 23-3/4"x23-3/4" 23-3/4"x71-3/4" Approximately 0.9 lb./sq. ft. Take II1 0.236" PETG 2'x2' 2'x6' 23-3/4"x23-3/4" 23-3/4"x71-3/4" Approximately 2 lb./sq. ft. Color Gallery – 0.118" PETG 2'x2' 2'x6' 23-3/4"x23-3/4" 23-3/4"x71-3/4" Approximately 0.9 lb./sq. ft. Acoustics This product does not offer any acoustical properties. Lighting For USG Translucents™ panels, fixtures should be placed a minimum of 18" above the ceiling and 18" o.c. for best results. For best results when backlighting use Gridware grid components. Suspension Systems Lays into standard USG Donn® Brand DX®, Centricitee™ DXT™, Curvatura™ 3-Dimensional and GridWare™, DXI™ and DXF™ suspension systems. PHYSICAL DATA Additional Documents and Resources Data Sheet: IC406 Care and Maintenance: IC456 Online Tools usgdesignstudio.com, cgcdesignstudio.com or usg.ecomedes.com Fire Classification USG Translucents™ panels meet the Class A acceptance criteria of 2021 IBC Section 803.1.1.1 for interior finishes as tested in accordance with NFPA 286. USG Translucents™ panels meet the Class B requirements for flame spread and smoke developed as tested in accordance with CAN/ULC S102 surface-burning characteristics. Recycled Content Decors: min. 40% recycled content. 100% recyclable. Rain: 40% recycled content. 100% recyclable. Color Gallery: Up to 40% recycled content. Limitations This product is produced to order and will vary from batch- to-batch – panels ordered at the same time will be produced together and will be identical. USG cannot guarantee batch-to- batch consistency. Note: When backlighting, consult a lighting engineer to achieve even illumination by minimizing shadowing caused by other ceiling components. Notes 1. Take II not offered with Curvatura 3D due to material thickness. 2. Rain (Acrylic) is class C 3. Custom color available by overlapping up to 3 films. USG TRANSLUCENTS™ LUMINOUS INFILL PANELS The trademarks USG, CGC, CENTRICITEE, CURVATURA, DONN, DX, DXI, DXF, DXT, FINELINE, GRIDWARE, IDENTITEE, TRANSLUCENTS, IT’S YOUR WORLD. BUILD IT., the USG/CGC logo, the design elements and colors, and related marks are trademarks of USG Corporation or its affiliates. Saftey First! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read SDS and literature before specification and installation. Specialty Ceiling Systems 113
ceilings systems catalog sc2000
| Title Name |
Pages |
Delete |
Url |
| Empty |
Search Text Block
Page #page_num
#doc_title
Hi $receivername|$receiveremail,
$sendername|$senderemail wrote these comments for you:
$message
$sendername|$senderemail would like for you to view the following digital edition.
Please click on the page below to be directed to the digital edition:
$thumbnail$pagenum
$link$pagenum
