IC308/rev. 9-14 © 2014 USG Corporation and/or its af liates. All rights reserved. Printed in U.S.A. IC308/rev. 8-24 © 2024 USG Corporation and/or its af liates. All rights reserved. Printed in U.S.A. Manufactured by USG Interiors, LLC 550 West Adams Street Chicago, IL 60661 HIGH RECYCLED CONTENT Notice The information in this document is subject to change without notice. CGC Inc. or USG Corp. assumes no responsibility for any errors that may inadvertently appear in this document. Client: Resurrection Roman Catholic Parish, Regina, Saskatchewan Architect: Stantec Architecture Ltd. Structural: JC Kenyon Engineering Mechanical: Stantec Consulting Electrical: Ritenburg and Associates Ltd. Interior Design Consultant: Innovative Interiors ORDER SAMPLES/LITERATURE USG: usg.com or
[email protected] CGC: contact Sales Representative TECHNICAL SERVICES 800 USG.4YOU (874-4968) FOR MOST UP-TO-DATE TECHNICAL INFORMATION AND LEED REPORT TOOL usgdesignstudio.com cgcdesignstudio.com usg.ecomedes.com Declare® Labels on select fi nishes, see usg.ecomedes.com for more details and documentation. PRODUCT INFORMATION Materials Finishes Typical Module Sizes1 Plenum Depth Weight Aluminum panels Painted, powder coated or anodized in a variety of optional perforation and embossing patterns. 1'x 4', 1'x 5', 2'x 2', 2'x 4', 2'x 6', 2'x 8', 4'x 4'2, 20"x 60", 30"x 30", 30"x 60" Custom sizes available Since panels are installed from below, the clearance for installation and removal of panels is minimal. Additional plenum clearance of up to 9" may be required for air boot and lighting installations, depending on the unit selected. Approximately 0.53 lb./ sq. ft., not including lights and air dif users. GRID LAYOUT The modular nature of USG Celebration™ Snap-In panels must be considered when an assembly is designed. The main tees and cross tees must be installed exactly on module lines. USG Celebration Snap-In panels cannot be installed across main tee and a 4 ft. cross tee. Panels may be fi eld-cut at walls and columns or terminated at a grid module for island installations. Larger panels will require cross tees at their midspan2. Please refer to IC592 for more information. ACOUSTICS3 Description Optional Acoustical Material Sound Rating – NRC Perforation CD06305NB (A062) Perforation CD11717 (A116) Perforated Panel Acoustibond™ backer 0.60 0.70 Perforated Panel 2", 0.75 lb. fi berglass in polybag (by others) 0.85 0.90 CODE APPROVAL USG Celebration™ Snap-In panels provide a continuous interlock with the suspension system through positive attachment. Supporting grid is capable of sustaining loads greater than those imposed by the USG Celebration system when installed in accordance with manufacturer’s instructions. The system meets requirements of ASTM C635 and tested per AC368. See ICC-ES ESR 1222. PERSPECTIVE USG Donn® Brand Fineline® DXF™ acoustical suspension system USG Celebration™ panels snap in place USG Celebration™ panel removal tool Celebration TM Removal Tool P/N 209216 R o t a t e DETAILS AND ACCESSORIES Perimeter Detail U2-3/32 U-molding hanger wire wall cut CELEBRATION Snap-In panel U2-3/32 panel hold- down clip (two per panel) U2-3/32 U-molding hanger wire column cut CELEBRATION Snap-In panel U2-3/32 panel hold-down clip (two per panel) translucent spacer as required US25 U Molding cut CELEBRATION Snap-In panel T-15 panel hold-down clip (two per panel) column 2"-long section of column ring used as panel hold-down hanger wire 2"-long section of column ring used as panel hold-down cut CELEBRATION Snap-In panel Edge Detail 13/4" 1/2" 1/4" Low Emissions (VOC) CDPH 01350 v1.2-2017 compliance on select fi nishes, see usg.ecomedes.com for more details and documentation. High Recycled Content USG classifi es High Recycled Content as greater than 50%. Total recycled content is based on product composition of pre-consumer (post-industrial) and post-consumer recycled content per FTC guidelines. PHYSICAL DATA Additional Documents and Resources System Brochure: IC415 Data Sheet: IC308 Perforations Selection Guide: IC425 Installation Guide: IC462 Exterior Ceiling Systems Guide: SC2561 Warranty: SC2102 Wall Mount: IC605 Cleaning Instructions: IC518 Online Tools usgdesignstudio.com, cgcdesignstudio.com or usg.ecomedes.com Fire Classifi cation ASTM E84 and CAN/ULC S102 surface-burning characteristics (with Acoustibond™ backer) Class A Flame spread: 25 or less Smoke developed: 50 or less Limitation Some commercially acceptable color variation may occur between lots and between dif erent size products of the same color. For more information about metal ceiling fi nishes, refer to Metal Ceilings Technical Guidelines published by the Ceilings & Interior Systems Construction Association. Recycled Content USG Celebration™ Snap-In Metal Panels: up to 90% recycled content. Notes 1. Additional sizes available on request. 2. – If panel length is ≥ 60 inches then one stabilizer bar or cross tee is required at midpoint. – If panel length is ≥ 96 inches then two stabilizer bars or cross tees are required at the 1/3 and 2/3 points. – Cross tees ≥ 96 inches used in large modules shall have hanger wires installed minimum 4 ft. o.c. 3. Refer to IC425 for additional NRC information based on perforation pattern. 4. Celebration™ Snap-In panels available in Metallics up to 2’ wide and up to 6’ long. 5. Celebration™ Snap-In panels available in Blanco Mat® 4182 up to 2’ wide and up to 6’ long. 6. Celebration™ Snap-In panels available in Timbre™ up to 2’ wide and up to 6’ long. USG CELEBRATION™ SNAP-IN METAL PANELS The trademarks USG, CGC, ACOUSTIBOND, BLANCO MAT, CELEBRATION, COMPÄSSO, DONN, DXF, FINELINE, TIMBRE, IT’S YOUR WORLD. BUILD IT., the USG/CGC logo, the design elements and colors, and related marks are trademarks of USG Corporation or its af liates. Safety First! Follow good safety/industrial hygiene practices during installation. Wear appropriate personal protective equipment. Read SDS and literature before specifi cation and installation. Specialty Ceiling Systems 93
ceilings systems catalog sc2000
| Title Name |
Pages |
Delete |
Url |
| Empty |
Search Text Block
Page #page_num
#doc_title
Hi $receivername|$receiveremail,
$sendername|$senderemail wrote these comments for you:
$message
$sendername|$senderemail would like for you to view the following digital edition.
Please click on the page below to be directed to the digital edition:
$thumbnail$pagenum
$link$pagenum
